Installation Guide

13ENIGMA SKY shower and tub door manual Ver 1 Rev 1 02/2018

Use Caution not to bang the glass

into the U-Channel or threshold.

Use a professional grade

glass suction cup if available

Fig 9

Fig 10

10. Make sure the Stationary Panel Glass (#02) is parallel to the front edge of the threshold and mark

the position of the glass on the threshold (This line will be different from the line drawn in step#3).

Slide the Guide Block (#12) into the notch of the Stationary Panel Glass (#02), and align it flush and

square with the edge of the glass. Mark its position on the threshold and also mark the hole for drilling

using a pencil (or center punch). (Fig 10)

9. Dry fit the Stationary Panel Glass (#02) into the

installed U-Channel (For Panel Glass) (#01). Do not

use silicone at this time. (Fig 9)