Installation Guide

17ENIGMA SKY shower and tub door manual Ver 1 Rev 1 02/2018

Fig 17

Fig 18

1-1/4”

measure 1-1/4”

from the plumb

line to the edge

of the bracket

inside the

shower

with the guide

rail level, mark

the bottom

position of the

bracket on the

wall

”

NOTE: It is important that

the guide rail is level when

marking the position of the

Guide Rail bracket on the wall.

To lower the rail:

Loosen the top set screw and

tighten the bottom set screw.

To raise the rail:

Loosen the bottom set screw

and tighten the top set screw.

1-1/4”

18. Using the reference mark on the threshold from Step #3,

draw a plumb line up the wall on the door side of the

opening. Measure over 1-1/4” into the shower from this line.

With the Guide Rail (#04) level, mark the position of the

Guide Rail Bracket (#06) on the wall. (Fig 18)

17. Level the Guide Rail (#04) across the opening.

If necessary, use the set screws on the Guide Rail Bracket (#06)

to adjust the level of the Guide Rail (#04).

(Fig 17 and Fig 18)