Installation Guide

20ENIGMA SKY shower and tub door manual Ver 1 Rev 1 02/2018

roller adjustment disk

NOTE: DO NOT install the handle onto

the door glass until instructed.

DO NOT attempt to lift the glass using the

handle. This could result in damage

to the glass and/or serious personal injury. Always

use an assistant or a professional grade glass

suction cup when handling heavy glass.

NOTE: Apply Thread Lock

(#20) to the roller bolts

during installation.

Fig 24

Fig 23

Painter’s Tape

24. Attach the Rollers (#08) to the Door Glass

(#03) with the wheels facing out. Apply Thread

Lock (#20) to the roller bolts during installation.

(Fig 24)

NOTE: The roller adjustment disks can be

rotated to tilt the door glass slightly for a better

seal into the U-Channel (For Door Glass) (#27)

that will be installed in Step #29.

23. Secure the Anti-Splash Threshold (#11) to the

threshold with several pieces of painter’s tape to hold

it in position tight to the threshold until the silicone cures.

(Fig 23)

To adjust the Rollers (#08): Support the

weight of the door glass with a shim or a

glass suction cup. Loosen the roller bolt

and rotate the adjustment disk to raise or

lower the edge of the door glass. Hold the

adjustment disk in place with a small allen

wrench and fully tighten the bolt.