Installation Guide

9ENIGMA SKY shower and tub door manual Ver 1 01/2018

Fig 3

Finished opening (W) - 1” = finished cut length (L)

Cut from the door end only which

is the end opposite from the holes

(L)

door end

panel end

NOTE: Use a metal file to remove any burrs

from the cut end of the Guide Rail (#04).

Metal File

Fig 2b

1/8”

to 1/4”

_____________ Model size

_____________ -(minus) Finished opening (W)

_____________ = Finished cut length (L)

threshold

outside

3. Starting from the wall on the stationary panel side

of the finished opening, use a Carpenter’s Square as a

guide and measure in 1/8” -1/4” from the outside of

the threshold and mark the threshold. Extend this line

across the threshold to the opposite wall to use for

reference in Step #18. (Fig 3)