Installation Guide

14ENIGMA SKY shower and tub door manual Ver 1 01/2018

Fig 11

Fig 12

*see

note

use a pencil or

a center-punch

to mark the hole

only use anchor

with tile threshold

face plate

Part#12 - Guide Block (with caps)

M5 X 10

12. To install the Guide Block (#12): Loosen the set screw on

the side and remove the guide block face plate. (Fig 12.1)

Apply silicone to the underside of the Guide Block (#12) and

screw the Guide Block (#12) to the threshold as described

below:

*NOTE:

◾For installation into an Acrylic threshold:

◽drill an Ø1/8”(3mm) hole and use the ST4.2 x 25mm

Round Head Screw (#18)

◾For installation into a Tile threshold:**

◽drill a Ø5/16”(8mm) hole, install Wall anchor 5/16” (#16)

and use the ST4.2 x 40mm Countersunk Screw (#17).

(Fig 12)

NOTE: For Tub installations: the bottom bracket must be

screwed down to the tub deck.

11. Remove the Stationary Panel Glass (#02)

from the U-Channel (For Panel Glass) (#01)

and carefully set it aside. (Fig 11)