Installation Guide

16ENIGMA SKY shower and tub door manual Ver 1 01/2018

TIP: Leave the set screws that hold the Guide Rail (#04) to the Guide Rail Bracket (#06)

loose for now to allow for side-to-side adjustment of the guide rail to make it easier to align

the holes in the guide rail with the holes in the panel glass. Tighten these set screws after

the holes are aligned and the glass brackets are installed.

TIP: Pinch the Guide Rail and Panel glass

together to hold the washers in place

while inserting the bolt.

Fig 16

Fig 15

1 2

15. Align the panel end of the Guide Rail (#04) with the installed Guide Rail Wall Bracket (#6b).

Slide the Guide Rail Bracket (#06a) over the Guide Rail Wall Bracket (#06b) and tighten the set

screws. (Fig 15)

16. Attach the Stationary Panel Glass (#02) to the Guide Rail (#04) using the Glass Brackets (#07).

(Fig 16)