Installation Guide

22ENIGMA SKY shower and tub door manual Ver 1 01/2018

TIP: Install the

SafeStop™

Bumper (#26)

using the 3M tape. Screwing the Bumper

to the wall using a 5/16” hole and anchor

is optional (see step 28).

NOTE: The surfaces need to be clean and free of

construction debris before installing the bumper.

Wipe the area with an alcohol swab before

installation

Inside

The

SafeStop™

Bumper (#26) is

reversible for Left (as shown below

from inside the shower) or Right wall

installation

Fig 27

3M TAPE

REMOVE

Wall

Inside

27. To install the

SafeStop™

Bumper (#26) with the 3M tape: Remove the 3M Tape backing and

position the

SafeStop™

Bumper (#26) onto the threshold against the U-Channel (#01) on the

stationary panel side of the installation. (Fig 27)