Installation Guide

Preparation

1. Prior to installation, examine all boxes and packages for shipping damage and compare the piece count

with the packing slip. After opening all boxes and packages read this introduction carefully. Check that all

of the necessary parts are included in the package by checking off the components on the “Detailed

Diagram of Shower Door Components”. If the unit has been damaged, has a finishing defect, or has

missing parts, please contact our customer support department within 3 business days of the delivery

date. Please note that DreamLine

will not replace any damaged products or missing parts free of

charge after 3 business days or if the product has been installed. Contact DreamLine

if you have any

questions, and please provide an order number, job name or other proof of purchase to help identify the

original order.

2. Please note that you should consult your local building codes with questions on installation

compliance standards. Building and plumbing codes may vary by location, and DreamLine

is not

responsible for code compliance standards for your project and will not accept any returns.

3. If this unit is going to be installed in a new construction, please install all of the required plumbing and

drainage before installing the shower. Use a competent and licensed (if required by local code) plumber

for all plumbing installation

4. Please make sure that prior to beginning the installation, the surfaces are leveled and solid and will be

able to support the total weight of the unit. Also make sure the walls are at right angles. Irregular

installation surface level, radius corners or improper angle of side walls will result in serious problems for

your installation. Note that some adjustments and drilling will be necessary during the installation process.

5. Please protect all primary surfaces of the product during installation. Never set the glass down directly

onto a tile floor. Leave corner protectors in place until necessary to remove them. Always use a piece of

wood or cardboard to protect the bottom edge and corners of the glass prior to and during installation.

6. This unit must be installed upon a finished threshold and against finished walls.

7. This model does NOT have any adjustment for out-of-plumb wall conditions. Verify that your walls are

plumb before proceeding with the installation.

8. This model requires that you drill into the threshold for proper installation.

9. Installation of the Guide Rail brackets into a stud or 2” x 6“ wood reinforcement is strongly

recommended. See Steps #8 and #19 for details.

10. This model requires a minumum of 2-1/4” of flat threshold space for installation.

11. Professional installation required.

NOTE: This manual will describe the shower door installation. Please follow the same sequence of

installation steps for the tub door installation.

NOTE: DO NOT attach the handle to the door glass until instructed.

DO NOT use the handle to lift the glass during installation. This may result in damage to the

glass and/or serious injury. Always use an assistant and/or a professional grade glass suction

cup when handling heavy glass panels.

4ENIGMA SKY shower and tub door manual Ver 1 01/2018