Manual

11FLEX Shower Enclosure manual Ver 3 Rev 3 03/2018
©2018 DreamLine. All Rights Reserved
Fig 2
Fig 3a
Fig 3b
2
3
Ø 5/16"
6
1
4
5
2
Ø 5/16"
3
5
6
1
4
3. Mark the holes on the wall for drilling
through the pre-drilled hole in the Return
Panel Wall Profile (#11).
Drill the holes into the wall using a Ø 5/16”
drill bit and insert the Wall Anchors (#03).
Apply silicone to the back surface of the
Return Panel Wall Profile (#11) and place
it back in position on the wall.
Attach the Return Panel Wall Profile (#11)
to the wall with the Truss head screws
ST4.2×40 (#05). (Fig 3a and 3b)
2. Mark the holes on the wall for
drilling through the pre-drilled holes in
the Wall Profile (#01).
Drill the holes into the wall using a
Ø 5/16 drill bit and insert the Wall
Anchors (#03).
Apply silicone to the back surface of
the Wall Profile (#01 ) and place it
back in position on the wall.
Attach the Wall profile (#01) to the
wall with the Truss head screws
ST4.2×40 (#05). (Fig 2)