Manual

13FLEX Shower Enclosure manual Ver 3 Rev 3 03/2018
©2018 DreamLine. All Rights Reserved
inside
outside
Fig 5
Fig 6
1
2
3
Ø 1/8"
6. Slide the Return Panel Assembly (#09)
into the Return Panel Wall Profile (#11).
(Fig 6)
5. Slide the Corner profile (#10) over the
aluminum edge of the Return Panel
Assembly (#09). Drill Ø 1/8” holes through
the predrilled holes on the Corner profile
(#10) into the aluminum profile on the Return
Panel Assembly (#09).
Secure the Corner profile (#10) to the Return
Panel Assembly (#09) with the Pan head
screws ST4.2×10 (#04). (Fig 5)