Manual

FLEX Shower Door Manual Ver 2 Rev 8 01/2018 © 2018 DreamLine. All Rights Reserved
14
12. Drill holes into the top and bottom Expanding
rails through the predrilled holes using an Ø 1/8”
drill bit.
ATTENTION:
Do not drill all the way through the Expanding
rail, only through the first layer.
Secure the Expanding rails using the Round head
screws ST4.2×10 (04) and the raised white
washers.
Cover the exposed screw heads and washers with
the Decorative caps (06).
See Fig. 15 for details.
13. Make any final adjustments to the
Door assembly (02) with the Wall
profiles (01). Operate the Glass
door to make sure that the
magnetic strips create a good seal.
From inside the shower, drill holes
in the aluminum profile of the
Door assembly at the top and
bottom of the Wall profile using
an Ø 1/8” drill bit.
ATTENTION:
Do not drill all the way through
the Expanding rail, only through
the first layer.
Secure the Door assembly inside
the Wall profile using the Round
head screws ST4.2×10 (04) with
the raised white washers.
Cover the exposed screw heads
and washers with the Decorative
caps (06).
See Fig. 16 for details.
Fig. 16
Fig. 15
Ø 1/8"
1
2
3
4
5
6
Ø 1/8"
Ø 1/8"
1
2
3
inside
inside
inside
inside