Manual

Table Of Contents

FLEX Shower Enclosure Panel manual Ver 3 Rev 5 072020

Fig 9

inside

Ø 1/8”

5 6

9. From inside the shower, drill holes into the top and bottom Expanding rails through the predrilled

holes using an Ø 1/8” drill bit.

ATTENTION:

Drill only through the first layer of the Expanding rail.

Secure the Expanding rails using

ST4.0 x 10 Pan head screw (#04) with the raised white washers. Cover

exposed screw heads with Decorative covers (#06). (Fig 9)