Manual

© DreamLine
All Rights Reserved
© DreamLine
All Rights Reserved
14
FLEX Shower Enclosure Panel manual Ver 3 Rev 5 072020
©2020 DreamLine. All Rights Reserved
inside
inside
Fig 10
1
2
3
Ø 1/8”
View from inside
View from inside
4
5
6
Ø 1/8”
RIGHT-HAND RETURN PANEL SHOWN AS AN EXAMPLE
Door
Return panel
10. Perform the final adjustments to the Door assembly (#02) and Return panel glass (#09) as
necessary. Operate the Door Glass to make sure that the magnetic strips are aligned and make full
contact from top to bottom. Drill holes into the aluminum profile of the Door assembly through the
predrilled holes in the Wall profile (#01) using an Ø 1/8” drill bit. Drill Ø 1/8” holes into the aluminum
profile through the predrilled holes in the Return panel wall profile (#11).
ATTENTION:
Drill only through the first layer of the profiles.
Secure the Door assembly (#02) to the Wall profile (#01) and the Return panel assembly (#09) to the
Return panel wall profile (#11) using the
ST4.0 x 10 Pan head screw (#04) with the raised white
washers. Cover the exposed screws with the Decorative covers (#06). (Fig 10)