Manual

Table Of Contents

FLEX 42x72 48x72 54x72 60x72 60x58 Shower and Tub Door manual Ver 1 Rev 4 072019

Make sure that the Wall

Profiles (#01) are tight to the

threshold and even with the

top of the frame assembly.

Fig 7

Fig 8

inside

the door opening

must be square

7. The opening for the door glass must be square.

Measure the top and bottom of the door opening and

adjust the Expandable Rails as necessary.

Push the Wall Profiles (#01) tight to the walls to

compensate for up to 1/2” out-of-plumb per wall.

(Fig 7)

8. Check that the frame assembly is plumb

on the wall and even across the threshold.

Mark the position of the Wall Profiles (#01)

on the wall and mark the holes for drilling

through the pre-drilled holes in the wall

profile flanges. (Fig 8)