Installation Guide

UNIDOOR PLUS (Style-J) manual Ver 1 Rev 7 102016

ATTENTION:

Prior to this step, please be sure the part of the wall and glass edge for installation of the

L-shaped strip*(08) is clean, dry and free from soap, oil and any construction debris.

20. Align the L-shaped strip*(08)

on the vertical edge of the

Stationary glass (11) so that

the door glass rests flush

against it in the closed position.

Ensure that the bottom of the

L-Shaped strip makes contact

with the threshold rather than

aligning the top of the strip to

the top of the Stationary glass.

Note the position on the wall

then gently remove the plastic

tape from the adhesive side of

the L-shaped strip. Firmly press

it onto the vertical edge of the

Stationary glass and to the

surface of the half wall.

See Fig. 31 for details.

Door

Stationary

glass

1/16"-1/8"

Fig. 31

inside

outside

inside

outside