Installation Guide

UNIDOOR PLUS (Style-J) manual Ver 1 Rev 7 102016
18
15. Place the U-Channel 2 (bottom profile)
(29) for the Stationary glass (11) onto the
ledge in line with the inside mark and flush
with 45° corner cut .
Mark the drill holes on the ledge through
the predrilled holes in the U-Channel 2 and
drill the holes using Ø5/16” drill bit.
Insert the Ø5/16” Wall anchors (13).
Apply waterproof silicone along the bottom
surface and around the holes of the U-
Channel 2 and fasten it to the ledge with
the Countersunk screws ST4.2×40 (23).
NOTE: The surface needs to be clean and
free of debris before applying silicone.
See Fig. 21 & 22 for details.
Fig. 22
Fig. 21
1
3
5
2
4
inside
outside
waterproof
silicone
6
Ø5/16”