Installation Guide

UNIDOOR PLUS (Style-J) manual Ver 1 Rev 7 102016

NOTE: Intermittently use a level throughout these

steps to ensure that this glass enclosure is leveled

properly.

9. While securely holding the glass panels, close the

Glass Door and align the Stationary glass (11) to it.

Use the door mark on the ledge as a reference to

ensure that the Door is perpendicular to the wall.

NOTE: The top of the Stationary glass must be

leveled with the Glass door. By traversing across

the top of both the Stationary glass and door,

height differences can be measured. The

Adjustment spacers (28) are provided to

compensate for such differences by inserting

them into the U-Channel 2 (bottom profile) (29).

Please make note of the spacer size that is

needed for your situation.

Ensure that the Stationary glass is level vertically

and precisely in line with Door. The U-channel 1

(wall profile) (09) will remain flush against the wall.

Outline the position of the glass panels along the

inside bottom edge of all U-channels on the ledge

and wall.

Mark the U-channel 1 (wall profile) (09) at the top

horizontal glass edge. The height of this mark will

change if spacers are needed.

See Fig. 11 & 12 for details.

inside

wall

inside

wall

U-channel 1

outside

inside

1/8"-3/16"

Align the Stationary

glass with the Door

inside

outside

Door

Stationary

glass

Door

Stationary

glass

Fig. 11

Fig. 12