Manual

Table Of Contents

UNIDOOR PLUS (STYLE I) manual Ver 1 Rev 6 10/2016

8. Carefully butt the Return panel glass (26) up against

the wall vertically according to the M value stated in

Size Table A on page 5. Intermittently use a level

throughout these steps to ensure that this glass

enclosure is leveled properly.

While securely holding the glass panels, close the

Glass Door and align the Stationary glass (11) to it.

Use the door mark on the threshold as a reference to

ensure that the Door is perpendicular to the wall.

If needed, adjust the position of the Stationary glass

and Return panel glass so that the Anti-Water strip

(inline panel) (19) makes tight contact to the Glass

Door from top to bottom. The U-channel 1 (wall

profile) (09) will remain flush against the wall.

Outline the position of the glass panels along the

inside bottom edge of all U-channels on the

threshold and wall.

Mark the U-channel 1 (wall profile) (09) at the top

horizontal glass edge.

See Fig. 10 for details.

Door

inside

wall

inside

wall

U-channel 1

outside

inside

Align stationary glass

and glass door

inside

1/16"-1/8"

Stationary

glass

Fig. 10

Fig. 9

NOTE: The next step involves careful

handling of the glass panels that were

just temporarily fixed together to

determine a custom fit measurement

unique to your installation. It is

essential that two installers be used

along with responsive communication.