Manual

©2018 DreamLine. All Rights Reserved
UNIDOOR Single Shower Door manual Ver 2 Rev 6 02/2018
17
Setting the Adjustable Hinges
The Adjustable hinges are pre-set to overclose
to 85º and are adjustable up to 90º after the
door is installed. Once the door glass is
installed, simply loosen the Allen set screws
and position the door to the desired closed
position. While holding the door in the new
closed position, retighten the Allen screws and
your door will now self-center to the chosen
closed position.
5a. Make sure the door glass is plumb and the edge of the
hinge is installed flush with the glass edge. Center the hinge
in the glass notch and tighten the faceplate screws (Fig 5a).
Be careful not to scratch the finished surfaces of the hinge
during installation.
Fig 5a
view from inside the
shower