Manual

©2018 DreamLine. All Rights Reserved
UNIDOOR Single Shower Door manual Ver 2 Rev 6 02/2018
19
6. Mount the Handle (02) to the Door Glass (01).
(Fig 6)
7. Measure the bottom of the Door Glass
(01) from end to end to determine the
actual width of the door. Cut the
Bottom anti-water strip (07) to the
size of your measurement and notch
approximately 3/8” off the inner side of
the Bottom anti-water strip as shown.
Press the Bottom Anti-water strip (07)
tightly onto the bottom edge of the
Door Glass (01).
NOTICE:
Make sure the Bottom anti-water strip
is flush to the vertical edge of the
Handle side of the Door Glass.
(Fig 7)
Fig. 6
2
1
3
inside
outside
inside
outside
4
inside
outside
inside
outside
Handle side
strip end
3/8"
Fig. 7
+/-