Manual

16ENIGMA-XO Shower Enclosure manual Ver 1 Rev 1 01/2018

Fig 12

inside

Fig 13b

for 72” model

Fig 13a

inside

rotate disk(s) to level rail

13. Once the Upper Guide Rail (#03) or Upper Guide Rail (for 72”) (#24) is level, mark the position

of the Guide Rail Bracket (#08) and the Wall Bracket (#19) on the wall. (Fig 13a)

*NOTE:

If installing the 72” model, also mark the position of the Wall Bracket (#19) on the threshold

for the Small Stationary Panel Glass (#23). (Fig 13b.3*)

12. If installing the 72” model:

Unscrew the disk from the Small Stationary Glass Bracket (#21) and loosen the set screw that secures

the bracket to the guide rail. If necessary, slide the Door Stopper (#01) away from the area so that it will

not interfere with the placement of the Small Stationary Glass (#23). (Fig 12.2)

Position the Small Stationary Glass (#23) onto the threshold and carefully butt it up against the installed

Return Panel Glass (#27). Align the Small Stationary Glass Bracket (#21) with the hole in the Small

Stationary Glass (#23). Reattach the outer disk and secure the Small Stationary Glass Bracket (#21) to

the Upper Guide Rail for 72” (#24). (Fig 12)