Manual

22ENIGMA-XO Shower Enclosure manual Ver 1 Rev 1 01/2018
©2018 DreamLine. All Rights Reserved
Fig 23a Fig 23b
Fig 24
X
X + 3/8”
for 48”or 60“
model
measure the distance ‘X’ from the guide block to the
wall and add 3/8”
for 72” model
L + 3/4”
L
measure the distance ‘L’ between the guide blocks
and add 3/4”
42 3
only use cap
when installing
up to a wall
for 48” & 60”
model
5*
1
for 72” model
22. Apply silicone to the bottom of the Anti-Splash Threshold (#15). Insert one end of the
Anti-Splash Threshold (#15) into the Guide Block (#12). Align the Anti-Splash Threshold (#15)
parallel with the front edge of the shower base or threshold.
Cover the other end of the Anti-Splash Threshold (#15) with the Threshold Cap (#16) against the
wall with a spot of silicone. (48” or 60” model) (Fig 24.4)
For the 72” model: Insert the Anti-Splash Threshold (#15) into the Small Stationary Glass
Bottom Bracket (#22). Add a spot of silicone inside the guide block. (Fig 24.5*)
21a. For the 48” or 60“ model size: Measure the
distance from the edge of the Guide Block (#12)
to the wall. This distance will be “X”. Cut the
Anti-Splash Guard (#15) to the size of:
(X) + 3/8”. (Fig 23a)
21b. For the 72” model size: Measure the
distance between the edge of the Guide
Block (#12) to the edge of the Small
Stationary Glass Bottom Bracket (#22). This
distance will be “L”.
Cut the Anti-Splash Guard (#15) to the size of:
(L) + 3/4”. (Fig 23b)