Manual

29ENIGMA-XO Shower Enclosure manual Ver 1 Rev 1 01/2018

Fig 34

Inside

Door

Panel

The Bumper (#30) is reversible for

Left or Right wall installation.

(Left wall installation shown below from

inside the shower)

Wall

Inside

3M TAPE

REMOVE

TIP: Install the Bumper (#30) using the

3M tape. Screwing the bumper to the wall

using a Ø5/16” hole and anchor is

optional (see step 32).

NOTE: The surfaces need to be clean and free of

construction debris before installing the bumper.

Wipe the area with an alcohol swab before

installation

31. To install the Bumper (#30) with the 3M tape: position the Bumper (#30) onto the threshold

and against the wall on the stationary panel side of the installation. (For 72” model, this will be the

side of the opening with the large stationary panel) Remove the 3M Tape and position the Bumper

(#30) onto the threshold against the Wall Bracket (#19). (Fig 34)