Manual

Installation steps

10ENIGMA-XO Shower Enclosure manual Ver 1 Rev 1 01/2018

Fig 1

Fig 2

Outside

<48",<60",<72"

<48",<54”,<60",<72"

1. Attach the three Wall Brackets (#19) to the Return Panel

(#27). The bolt side of each Wall Bracket (#19) must face

inside the shower. (Fig 1)

2. Place the Return Panel (#27) on the pre-installed

shower base or threshold. Position the panel up against

the wall and level it vertically (plumb). Make sure the

Return Panel (#27) is aligned with the shower base or

threshold and will create an opening that is within the

model dimensions of the door section (as measured

from the finished wall to the inside surface of the return

panel glass). (Fig 2)

Return panel placement depends on the

model size purchased:

<48” (SHEN-6132480),(SHEN-6134480) or

<54” (SHEN-6132540),(SHEN-6134540) or

<60” (SHEN-6132600),(SHEN-6134600) or

<72” (SHEN-6132720),(SHEN-6134720)

See the “Shower Enclosure Plan” on pages 6 and 7 for

dimensions.