Manual

11ENIGMA-XO Shower Enclosure manual Ver 1 Rev 1 01/2018
©2018 DreamLine. All Rights Reserved
Fig 4
Fig 3
1
2*
3 4 5
Ø5/16"
Ø1/8" or
Ø5/16"
1 2
3 4
3. Outline the position of the Wall Brackets (#19)
on the wall and the shower base or threshold.
Carefully set the Return Panel (#27) aside.
Remove the Wall Brackets (#19) from the Return
Panel (#27). Place the brackets against the outlined
positions and mark the holes on the wall and
threshold for drilling. (Fig 3)
4. Drill the holes in the wall using a Ø5/16” drill bit and insert the Wall Anchors (#9b) for two of the
Wall Brackets (#19). Mount the Wall Brackets (#19) to the wall using the Round Head Screw
ST4.2×55 (#18). *Drill a hole into the threshold using a Ø1/8” drill bit for an acrylic base
(or Ø5/16” and an anchor for tile) and mount the remaining Wall Bracket (#19) to the threshold using
the
ST4.2x40 Countersunk screw (#17). (Fig 4)