Manual

24ENIGMA-XO Shower Enclosure manual Ver 1 Rev 1 01/2018

Fig 28

Fig 27

outside

face plate

clear

gaskets

26. Attach the Guide block face plate to the installed

Small Stationary Glass Bottom Bracket (#22) and

tighten the set screw with the supplied allen wrench.

Make sure that the clear gaskets are in place to protect

the glass. Use the supplied Decorative caps to cover the

screw holes. (Fig 28)

25. If installing the 72” model: Apply a thin bead of silicone to the edge

of the Small Stationary Panel Glass (#23) and carefully butt it up against

the installed Return Panel Glass (#27). Attach the Small Stationary Panel

Glass (#23) to the Upper Guide Rail (#03) using the Small Stationary

Glass Bracket (#21).

Attach the face plate to the Wall Bracket (#19) on the threshold.

Use some painter’s tape to secure the corner until the silicone cures.

(Fig 27 and Fig 28)