Manual

26ENIGMA-XO Shower Enclosure manual Ver 1 Rev 1 01/2018

Fig 30

front view

Upper Guide Rail

side view

NOTE: The Safety set screw on both wheels MUST BE

re-tightened after installation to prevent the large bolt

from coming loose. Apply thread lock during installation.

(See details in Fig 30 and Fig 31 and also on Page 33)

Fig 31

add threadlock to

the safety set screw

and wheel bolt

safety set screw

1 2

28. Attach the two remaining Rollers (#04) into the holes

in the Door Glass (#05) beneath the Upper Guide Rail

(#03). Adjust these Rollers (#04) to make contact with the

Upper Guide Rail (#03). Apply Thread Lock Adhesive

(#26) to the bolts and safety set screws. Align the safety

set screw towards the bottom(Fig 30.4) for easier access to

retighten after installation. (Fig 30)