Manual

Tools
Tip: Measure the finished opening before
proceeding with the installation to be sure
that the correct model size has been ordered.
Tip: Prior to installation, cover the shower/tub
drain with tape to prevent losing screws or
small parts.
NOTE: Unpack your unit carefully and inspect it. Lay it out and identify all parts using the detailed
diagram and packing list in this manual as a reference. Before discarding the carton, check for small
hardware bags that may have fallen to the bottom of the box. If any parts are damaged or missing,
please contact DreamLine
®
for replacement. The shipping boxes may contain extra parts not used in
your model configuration.
NOTE: Retain these installation instructions for future reference.
Tip: Set screw gun clutch to low setting when
installing screws and bolts to prevent stripping
the heads.
!
!
!
5ENIGMA-XO Shower Enclosure manual Ver 1 Rev 1 01/2018
©2018 DreamLine. All Rights Reserved
Metal File
(Ø1/4")
Drill bit
(Ø1/8")
Drill bit
(D=5/16")
Drill bit
(Ø3/8")
Drill bit
Professional-grade
Glass suction cup
(3mm)
(6mm) (8mm) (10mm)
Tape
Phillips
Measure
Pencil
Level
Drill
Power
Screwdriver
Silicone
Hammer
Painter’s
Tape
Razor
Knife
Miter sawChop saw
Hacksaw
or
Threshold must be level.
!