Manual

Preparation

1. Prior to installation, examine all boxes and packages for shipping damage and compare the piece

count with the packing slip. After opening all boxes and packages read this introduction carefully.

Check that all of the necessary parts are included in the package by checking off the components on

the “Detailed Diagram of Shower Door Components”. If the unit has been damaged, has a finishing

defect, or has missing parts, please contact our customer support department within 3 business

days of the delivery date. Please note that DreamLine

will not replace any damaged products

or missing parts free of charge after 3 business days or if the product has been installed.

Contact DreamLine

if you have any questions, and please provide an order number, job name or

other proof of purchase to help identify the original order.

2. Please note that you should consult your local building codes with questions on installation

compliance standards. Building and plumbing codes may vary by location, and DreamLine

not responsible for code compliance standards for your project and will not accept any

returns.

3. If this unit is going to be installed in a new construction, please install all of the required plumbing

and drainage before installing the shower. Use a competent and licensed (if required by local code)

plumber for all plumbing installation

4. Make sure that prior to beginning the installation, the surfaces are leveled and solid and will be

able to support the total weight of the unit. Also make sure the walls are at right angles. Irregular

installation surface level, radius corners or improper angle of side walls will result in serious

problems for your installation. Note that some adjustments and drilling will be necessary during the

installation process.

5. Protect all primary surfaces of the product during installation. Never set the glass down directly

onto a tile floor. Leave corner protectors in place until necessary to remove them. Always use a piece

of wood or cardboard to protect the bottom edge and corners of the glass prior to and during

installation.

6. This unit must be installed upon a finished threshold and against finished walls.

7. This model has 1/2” of adjustment for out-of-plumb wall conditions within the wall

profiles.

8. This model requires a minumum of 1” of flat threshold space for installation.

9. Professional installation recommended.

2CORNERVIEW/FRENCH CORNER Shower Enclosure Manual Ver 4 Rev 1a 05/2021

This enclosure is available with clear glass as the “Cornerview”, or with patterned glass

as the “French Corner”. The installation of the “Cornerview” modelwith clear glass will be

used as an example throughout this manual.