User Manual

“INFINITY-Z” Rev.2 Ver.4 08/2013
11
15. Do the final adjustments of the assembled unit in the Wall
profiles.
Drill the holes in the Wall Profile and Glass profile using Ø 1/8”
drill bit.
ATTENTION:
Do not drill the profiles throughout, only the first layer of the
wall and glass profiles.
Secure the Wall profile to the Glass profile using the Round
head screws ST4.2×10 (11).
Cover the exposed screw heads with the Decorative covers (13).
See Fig. 15 for details.
Fig. 15
16. Apply the sealant along the profiles and guide rails; on
the seams between the bottom guide rail and the
profiles as well as along the shower base or threshold.
See Fig. 16 for details.
Fig. 16
2
1
3
Ø 1/8”
Waterproof
Silicone