User Manual

“INFINITY-Z” Rev.2 Ver.4 08/2013
7
6. Slightly tap the Single side strip (08) in between the glass and
the glass profile using wooden shims or other piece of wood.
The strip should be inserted from the side that will face inside
the shower.
ATTENTION:
Do not use the screwdriver or other metal objects; you can
scratch or damage the glass and aluminum.
7. Repeat Step #3, Step #4, Step #5 and Step #6 to fasten the
upper Guide rail (03) to the Glass profile and secure the
Stationary glass by the Glass holder (16).
See Fig. 7 for details.
Fig. 7
8. Slide the Wall profiles (02) all the way on the Glass profiles
(01) on both sides. Make sure the flange of the wall profile
faces inside the shower.
See Fig. 8 for details.
Fig. 8