Manualshelf

Owner Manual

ManualsBrandsDreamLine ManualsBathroom Remodel & Bathroom FixturesInfinity-Z 60" W x 74.75" H Semi-frameless Sliding Shower Kit
12345678910
©2018 DreamLine. All Rights Reserved
SLIMLINE SHOWER BASE manual Ver 5 Rev 9a 11/2018
2
Preparation
1. Prior to installation, examine all boxes and packages for shipping damage and compare the
piece count with your packing slip. After opening all boxes and packages read this introduction
carefully. Check that all of the parts are included in the package by checking off the
components on the parts list. If the unit has been damaged, has a finishing defect, or has
missing parts, please contact our customer support department within 3 business days of the
delivery date. Please note that DreamLine
®
will not replace any damaged products or
missing parts free of charge after 3 business days or if the product has been installed.
Please contact DreamLine
®
if with any questions and please provide an order number, job
name or other proof of purchase to help identify the original order.
2. Install all of the required plumbing and drainage before installing the shower base. Use a
competent and licensed (if required by local code) plumber for all plumbing installation.
3. Shower bases must be installed by a licensed plumber. Please note that you should
consult your local building codes with questions on installation compliance standards.
Building and plumbing codes may vary by location and DreamLine
®
is not responsible for
code compliance standards for your project.
4. Make sure that prior to the installation the installation surface is leveled and solid and will be
able to support the total weight of the unit. Also make sure the walls are at right angles. While
some adjustment in leveling of the tray is possible, irregular installation surface level or
improper angle of side walls will result in serious problems for your installation. Please note
that some adjustments may be necessary during the installation process.
5. Center drain configurations are centered on the width only. See technical drawing tables
for drain locations.
6. Drain not included with this product. The drain opening is 3-3/8” in diameter and accepts a
standard 2” compression fitted drain.
IMPORTANT NOTE:
Dimensions provided are for reference only. Measure the actual shower tray
before installation. This includes overall dimensions and drain location.
Allowed tolerance for center of the drain is +/-1/2".
Tools Required
XXX
Pencil