Owner Manual

Tools

INFINITY-Z Shower and Tub Door Manual Ver 5 Rev 2 012020 5

NOTE

TIP

To be sure that the correct model size has been ordered, measure

the finished opening before proceeding with the installation.

Cover the shower/tub drain with tape prior to installation to

prevent the loss of screws or small parts.

To prevent stripping the screw heads, set power

drill to a low setting when installing screws.

NOTE

Unpack your unit carefully and inspect it. Lay it out and identify all parts using the Detailed

Diagram on page 6 and the included packing list in this manual as a reference. Before

discarding the carton, check for small hardware bags that may have fallen to the bottom of

the box. If any parts are damaged or missing, please contact DreamLine

for replacement.

The shipping boxes may contain extra parts not used in your model configuration.

Retain these installation instructions for future reference.

Extender Driver Bit

Professional-grade

Glass suction cup

Work Gloves

Safety Glasses

Power

Drill

Hacksaw

Pencil

Tape

Measure

Soft Head

Hammer

Miter Saw

Level

Phillips

Screwdriver

Silicone

Ø3/16"

(4.76mm)

Drill Bit

Ø5/16"

(8mm)

Ø1/8"

(3mm)

Drill Bit

Metal File