Manual

1 of 2

CAMARGUE HEADBOARD

Assembly Instructions

NOTE: It will require two people to assemble this bed. Assembly should be carried out in the room that

the bed will be used in.

1. We suggest you spend a short time reading through this leaflet and then

follow the simple step by step instructions.

2. If you follow the instructions carefully the end result should be worth the effort.

3. Do not discard any of the packaging until you have checked that you

have all the parts and the pack of fittings.

4. Assemble this product on a carpet.

5. To ensure an easier assembly, we strongly advise that all fittings are only

finger tightened during initial assembly. Only upon completion of the assembly

should all fixing points be fully tightened.

6. We recommend a periodic check on all fixing points to make sure they remain

fully tightened.

7. Keep glue and fittings out of children’s reach.

In the unlikely event that this product has missing or damaged parts,

please call 08442 920000 to obtain spares

spare

Before you

start, here

is some

helpful advice

PAGE 1
CAMARGUE HEADBOARD Assembly Instructions NOTE: It will require two people to assemble this bed. Assembly should be carried out in the room that the bed will be used in. Before you start, here is some helpful advice 1. We suggest you spend a short time reading through this leaflet and then follow the simple step by step instructions. 2. If you follow the instructions carefully the end result should be worth the effort. 3.
PAGE 2
ASSEMBLY Component parts and fittings contained in the box PARTS Fittings A M8x60 4pcs B 1 piece Washer 4pcs C Spring washer 2 pieces 4pcs D 5MM Allen key Connect the 1 and 2 using the bolts A, Washers B and spring Washers C.