English
TABLE OF CONTENTS WARNING/REMEMBER/CAUTION ---------------------------------------------------------------------- 6 SAFETY MEASURES----------------------------------------------------------------------------------------7 ABOUT THE INSTRUCTION MANUAL --------------------------------------------------------------------8 MARKETING AND SIGNS APPLIED TO THE RECEIVER ------------------------------------------------8 BASIC INFORMATION ABOUT THE RECEIVER ---------------------------------------------------------9 1
9.7 AUDIO CHANNEL ----------------------------------------------------------------18 9.8 AUDIO LANGUAGE 9.9 FREEZE MODE 9.10 TELETEXT 9.11 EDIT CHANNEL LIST, EVENT LIST 9.12 MEDIA ---------------------------------------------------------------------------19 9.12.1 RECORDINGS & MOVIES 9.12.2 MUSIC 9.12.3 PHOTOS 9.13 Jump Time ----------------------------------------------------------------------20 9.14 MULTI FEED 9.15 SUBTITLE LANGUAGE 9.16 EDIT/SEARCH WINDOW 10.
16. USER -------------------------------------------------------------------------------------------------33 16.1 MENU & AUDIO LANGUAGE 16.2 TIME & DATE 16.3 PARENTAL LOCK ---------------------------------------------------------------34 16.4 MENU & CHANNEL LOCK 16.5 PVR SET-UP 17. MULTIMEDIA ---------------------------------------------------------------------------------------35 17.1 FILE BROWSER 18.
WARNING !!! Supported network features as internet radio, Youtube, etc depend on your network connection speed and quality and the server settings (limitations, bandwidth, location) which you are accessing. Playback of copy protected content, damaged files, etc. may fail or be incorrect. Video files with a resolution higher than 1920x1080i, 1280x720p or with a video bitrate over 30Mbps may not play properly.
SAFETY MEASURES We request that you read the instruction manual and recommendations set forward therein. Also remember to correctly position the satellite antenna! In order to avoid an electric shock, never open the housing. Damage to the warranty seal shall void the warranty. Disconnect the receiver from the mains during thunderstorms or when it is not to be used for an extended period of time. Please remember that the warranty does not cover damage to the equipment caused by a lightning strike.
ABOUT THE INSTRUCTION MANUAL We have made every effort to provide the most current information about its products. We do not grant any guarantee as to the contents of the present instruction manual and disclaims any implied guarantees concerning market value or suitability for specific purposes. The information contained herein is an instruction intended to enable the correct usage and maintenance of the receiver.
BASIC INFORMATION ABOUT THE RECEIVER 1. Main features ∨ Reception of high definition channels ∨ Upscaling of PAL signals to 1080 P resolution ∨ 20 programmable timers ∨ Separate favorite, TV and Radio channels list ∨ Quick channel search function (Quick Find) ∨ Teletext and subtitle display ∨ DiSEqC 1.0, 1.1 and DiSEqC 1.2, USALS ∨ MPEG-2, MPEG-4, MPEG-4 AVC/H.
4. Remote control STAND BY Switch between operation and STAND-BY Stand-by/deep Stand-by mode and to boot. VOL+/VOL- Adjust the audio volume. CH UP/DOWN Change channels (next/previous). PIP To go to Picture in Picture mode PIP (another program's video Play back in a sub screen available while watching a program) POSITION To move sub screen's position POSITION (up, down, left and right) in POP mode EDIT & CI Enter/exit the edit menu. EJECT Eject the USB memory.
MUTE Turn the sound on/off. TV/RADIO LAST Change between TV and Radio mode. LAST Return to previous channel. V. Format Change the screen resolution. NUMERIC KEYS TV : Enter a channel number directly. MENU: Enter values. Enter/exit TELETEXT Enter/exit the zoom mode. Pause a live program. Info Enter/exit information about the program, movie/recording. EPG Enter/exit the program guide. MENU Enter/exit the menu and save change in menus. EXIT Exit all menu modes.
5.
① MAIN POWER ADAPTOR (DC IN) Connect the supplied power adaptor to this socket. The flat side of the plug with the arrow should point up. Please use only the original power adaptor supplied with the device. ② IR (Infrared Sensor) Connect the supplied infrared sensor to this socket. It received commands from the remote control unit and should be place near the front of you TV.
6. Connection overview The following illustrations show cable connections for a television and other devices connected to the receiver. If you require any assistance in connecting individual devices, contact your local technician. Before connecting or altering connections, disconnect the receiver from the mains.
6.1 Power Supply Connect the DC cable of the mains adaptor to the DC IN jack of this receiver. Then insert the plug of the mains adaptor into a mains socket. 6.2 IR (Infrared Sensor) Connect the cable of the infrared sensor to the IR jack of this receiver. Place the infrared sensor near the front of the TV set so that it can be reached unimpeded by the infrared signal of the re mote control from your favorite seating place. 6.
8. First installation After you turned on your receiver for the first time or after a factory reset, the installation wizard will start automatically. 8.1 Operating the menu Select an option with the ▲/▼, ◀/▶ keys. Enter an option with the OK key. 8.2 Language selection Menu language Select the menu language. Audio language Select the standard audio language for programs.
9. DAILY USAGE 9.1 Volume control Volume Press VOL+/VOL-or ◀ /▶ keys (while watching a program) to adjust the Mute volume. Press MUTE key to turn the sound On and Off. 9.2 Changing channels ▲/▼keys or enter the channel number with the 0-9 Change Press CH. UP/DOWN, Back numeric keys to change channels. Press LAST key to return to the previous channel. 9.3 Channel lists Press OK key to display all satellite/user lists and sort options.
is displayed for programs in High Definition. is displayed, if subtitle languages are available. is displayed, if Teletext is available. is displayed, if Multifeeds are available. is displayed for locked channels. is displayed for pay TV channels. is displayed for programs in Dolby Digital. displays the audio channels (mono, stereo). SIGNAL displays the signal quality and strength. 9.7 Audio channel Press AUDIO key to select an audio channel (stereo, mono left/right). Stereo. Left/right channel (Mono). 9.
Select an event with the press 9.12 Media ▲/▼keys. Press (red) key to delete an event, (green) key to delete all events. Press MEDIA key to view REC, MOVIES, MUSIC and PHOTOS. 9.12.1 Recordings & movies Recording format Movie formats Trp. DivX/Xvid (.avi, .divx), FLV (.flv), PAL (50Hz), PAL (50Hz) MPEG-2 (.mpg, .m2v, .ts, .trp), MKV. Playback Preview Full screen Select a movie or recording and press OK key. Select a movie or recording and press OK key twice or PLAY key. Press STOP key to stop.
List Select a photo and press OK key to preview the photo. Press OK key again to view the photo in full screen. Thumbnails Select a photo and press OK key to view the photo in full screen. Select the next/previous photo with the t/u keys. Thumbnails/ list Press (yellow) key to change between thumbnails and list mode. Slideshow Press PLAY key to start the slideshow of a folder. Press STOP/EXIT keys to stop. Edit Photos & folders Sort Press (green) key to sort (A-Z/Z-A, Date).
10. Program guide Press EPG key to display the electronic program guide for current, next and scheduled programs. Now/next schedule. Select a channel with the Enter the now/next schedule with the ◀/ ▶ ▲/ ▼ keys to display the now/next schedule. keys. Press OK key to change to the program. Press OK key again to watch it in full screen. Press INFO key to display detail information, if available. Week schedule. Select a program with the ▲/ ▼, ◀/ ▶ keys.
11. RECORDING 11.1 Recording guide USB memory To record programs a storage device (USB Memory 2.0) must be connected formatted in FAT32, EXT2, EXT3. To format an USB memory larger than 32GB with your windows PC in FAT32, download the Fat32Formatter program from the internet to your PC. To record HD programs the USB memory must have a minimum writing speed of 20 Mbps. It is recommended to record HD channels to a USB hard disk. It is only possible to record to one connected storage device.
Duration Press the ◀/ ▶ keys to change the duration (max. 240 min.) Stop in 10 min. steps. Press OK key to stop a recording. 11.3 Timeshift recording Timeshift enables you to record and playback a program you are watching, while it is still being broadcasted. Start Press PAUSE key to start the Timeshift recording and to pause the program. Press PLAY key to start the playback. Stop The recording stops, if you change to another channel, or if you press STOP key.
13.Create & Edit 13.1 Edit channel Delete Press Lock/unlock Press Move Press at once. Press Press (red) key delete a channel. (green) key to lock/unlock a channel. (yellow) key to move the position of a channel or multiple channels (yellow) key to select a channel or multiple channels. ▲/▼keys to select the new position. Press (red) key to move the channel/channels. Press OK key to preview a channel. Rename Press List Select a channel list with the Channel Enter the channel number.
Edit the 10 user lists. List Move between columns with the the Rename Edit 13.3 ▲/▼/OK ◀/ ▶ keys and select an option or channel with keys. Select a list and press (yellow) key to rename the user list. Select a list and press (red) key to edit. Select a list option (1st column) to display (2nd column). Select a channels and press OK key to copy the channel to the user list (3rd column). Enter the list and press OK key to delete a channel from the user list. Press (red) key to watch a channel.
14. Installation 14.1 Antenna Select the Antenna type. Antenna Select the Antenna (A=LNB A). Fixed Select this option for a fixed antenna. DiSEqC 1.2 Select this option for a DiSEqC 1.2 motor. USALS Select this option for an USALS motor. Enter the longitude (East/West) and latitude (North/South) of your location. Unicable/SCD Select this option for a Single Cable Distribution Antenna to deliver broadcast over a single cable to multiple users. Select the user Band B1-B8. Select the Band frequency.
Satellite Select a satellite. Transponder LNB 22Khz DiSEqC DiSEqC 1.1 Select Select Select Select Select a transponder. the LNB frequency. On or Off. the DiSEqC (A, B, C, D)/Mini A, B port for the selected satellite. the DiSEqC port (1-16) for the selected satellite. Satellite position This option is activated, if you selected Unicable/SCD antenna in the Antenna menu. Select the position.
Transponder Go to position Select a transponder. Press OK key to move the motor to the stored position. Move Press the Steps position/limits. Select the motor steps (1-127). Move in steps Press the Save position steps. Save the selected satellite position. ◀/ ▶ ◀/ ▶ (West/East) keys to move the motor to the desired (West/East) keys to move the motor in the selected Save limits & options East/West limit Select this option to save the limits.
Video PID Audio PID PCR PID Save Enter Enter Enter Press the Video PID. the Audio PID. the PCR PID. MENU key to save the changes. 14.5 USB update Download USB NOTE Start Reboot Download from the latest system software to your PC and transfer the file to an USB memory. Connect the USB memory to your receiver. It is only possible to update via an USB memory formatted in FAT32. Enter this menu option to start the update. After an update the set will automatically shutdown.
15. Settings When you press OK button at Network Connection on Settings column, you will see the three choices which are Cable, WIFI and 3G Modem. Please select one of the connection method you will use. 15.1 Network connection When you select Cable, you will see the below screen. During booting your receiver will connect automatically to the network. Auto To connect automatically by DHCP. Manual To connect manually with a static IP address. IP Enter the fixed IP address.
When you select WIFI, you will see the below screen. When you select 3G Modem, you will see the below screen. 15.2 uPnP 15.3 TV OUT Not available at the moment. Screen format Select the screen format(Auto, Pan & Scan, 4:3/Letterbox). Menu transparency Select the transparency(50%-100%).
Information bar Select the automatic display time of the information bar for TV, movies, recordings. If you select Off, the information bar will not be displayed. TV scart signal Dolby Digital CI message Select the TV scart output option (CVBS/RGB). Select On to output dolby digital audio via S/PDIF. Select On to display messages of the CAM and card. If you select Off, the messages will not be displayed. 15.
16. User 16.1 Menu & audio language Menu language Audio language Select the menu language. Select the standard audio language for programs. 16. 2 Time & date Mode Date Time Select an option (auto/manual). Enter the date manually. Enter the time manually.
UTC Summer Time Sleep time Wake up time Select your local zone. Select the option (On/Off). Set the time to turn off your receiver automatically. Set the time to turn on your receiver automatically. 16.3 Parental Lock PIN Change NOTE The 4 digit PIN code is initially set to 0000. Enter the New PIN code twice for confirmation and the Current PIN code to change the PIN code. Contact your local dealer, if you forgot your PIN code. 16.
17. Multi Media Please press button on live channel or main channel to enter Multi Media menu. 17.1 File Browser Edit files (recordings, movies, MP3s, Photos). New folder Delete Copy Move Rename Sort NOTE Press (yellow) key to create a new folder in the selected directory. Press (blue) key to delete. Press key to copy a file. Press INFO key to move a file from one folder to another. Press EPG key to rename a file. Press USER key to sort (A-Z/Z-A, Date) Unlock a locked recording or movie to copy/move it.
19. Specification 19.1 Operating System Linux Kernal Version 2.6 19.2 Tuner Frequency Range RF Input/Output Connector Input Signal Level Demodulation Standard Symbol Rate Multi Decoding Method LNB Power 950MHz to 2150MHz F-type Female (75ohm) -65 dBm~ -25 dBm DVB-S, DVB-S2 : QPSK, 8PSK DVB-S (QPSK) : 1~45Msps DVB-S2 (8PSK/QPSK) : 10~30Msps LDPC/BCH DVB-S2 (1/2, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10) V:+13.5Vdc, H:18Vdc 400mA Max. with Overload Protection 19.3 Video / Audio Decoding Transport Stream MPEG-4 H.
