Instructions / Assembly



marble upon the floor (See Picture 1).

1). Don't open or close the door forcefully to avoid damage to the

unit. Apply some lubricate to the hinges every one month.

2). Never use acid or alkaline solution or hard article to clean

the hinges or glass surface.

3). Check the shower door periodically for part damage or screw

loosening. Contact local dealer or manufacturer for service.

2).Insert fixed panel(#4 in Part List) into wall

profile(#2 in PL) and bottom waterproof aluminum

channel(#10 in PL). Make sure the fixed panel is

plumb both to wall and floor. Mark a line with pencil

against wall profile(#2 in PL). Mark holes for wall

profile, drill and insert wall plug(#3 in PL). Fasten

wall profile(#2 in PL) to wall with ST4*30 screw(#8 in

PL). Remove fixed panel, and fasten bottom aluminum

channel(#10 in PL) to floor with ST4*20 screw (#9 in

PL). See picture 2.

PAGE 1
marble upon the floor (See Picture 1). 2).Insert fixed panel(#4 in Part List) into wall profile(#2 in PL) and bottom waterproof aluminum channel(#10 in PL). Make sure the fixed panel is plumb both to wall and floor. Mark a line with pencil against wall profile(#2 in PL). Mark holes for wall profile, drill and insert wall plug(#3 in PL). Fasten wall profile(#2 in PL) to wall with ST4*30 screw(#8 in PL). Remove fixed panel, and fasten bottom aluminum channel(#10 in PL) to floor with ST4*20 screw (#9 in PL).