ENGLISH 3D20 Quick Start Guide WARNING 1 READ ALL OPERATING/SAFETY INSTRUCTIONS IN THE MANUAL AND FAMILIARIZE YOURSELF WITH THE DREMEL 3D20 BEFORE SETUP AND USE. FAILURE TO COMPLY WITH THE WARNINGS AND INSTRUCTIONS MAY RESULT IN FIRE, EQUIPMENT DAMAGE, PROPERTY DAMAGE, OR PERSONAL INJURY.
1 Unboxing 2 Kit Contents IMPORT Read BeforeANT: Using IMPORT Lire avantANT : usage IMPORT Leer antes ANTE: de usar Operating/Sa fety Instruc Consignes tions de Instrucciones sécurité/d’utilisatio n de funcion amiento y seguridad 3D20 Idea Builde r 3D20 Quick Start Guide Call Toll Consume Free for r Informatio & Service n Locations P.O.
1 a) If the leveling sheet cannot slide between the extruder and build platform, turn the knob counterclockwise until you can slide the leveling sheet between the extruder and build platform with some resistance. 2 leveling sheet can between the extruder and 3D20 Getting toslide Know Your Dremel 3b)buildIf theplatform too easily, turn the knob clockwise until you can slide the leveling sheet between the extruder and build platform with some resistance. 8 the right 4.
1 4. Your Dremel 3D20 will align the extruder with the build platform and will begin heating the extruder. 2 5. Once the build temperature is reached, your model will begin to build. 4 Getting Ready to Build 6. Touch screen will display “Object Finished”. Tap the check box to confirm. Wait until the touch screen indicates that the extruder temperature is “COOL”. OBSERVE ALL PROVIDED WARNINGS AND SAFETY WARNING INSTRUCTIONS WHEN USING THE DREMEL 3D20.
ocations 1-844-4DRML3 For English Version See page 2 mations s adresses de service de nos centres appelez ce après-vente, numéro gratuit Voir page Dremel 3D20 1 Llame gratis para obtener informaci para el consumid ón ubicacion or y D (1-844es de servicio 437-6533) www.dremel.co m Version française 37 WARNING Versión en español Ver la página 73 READ ALL OPERATING/SAFETY INSTRUCTIONS IN THE MANUAL AND FAMILIARIZE YOURSELF WITH THE DREMEL 3D20 BEFORE SETUP AND USE.
. Tap “Finish” to complete the leveling process. 4. Build Platform 5. Build Platform Clips NEXT 6 2 7 TURN LEFT TO RAISE THE BUILD PLATFORM TURN RIGHT TO LOWER THE BUILD PLATFORM 4 4 Filament Spool 7. TURN LEFT TO RAISE Filament Spool Holder/Lock THE BUILD PLATFORM 8. Extruder Tip BACK 9. 5 NEXT 6. TURN RIGHT TO LOWER THE BUILD PLATFORM 5 Extruder Fan 10. Extruder 3 11. Extruder Intake 15 16 14 12. X-Axis Guide Rails 13 13. Stepper motor (1 of 3) 14. Z-Axis Guide rail 6 15.
. Wait for the extruder to cool before removing your object. FILAMENT INSTALLATION With the attached, remove build platform 1.8. Ensure theobject powerstill switch is in the off position, remove from the lid theremove build area. and the build platform. LIFT 2 1 Use your handspool to peel your object from thespool buildbeing platform. If 2.9. Place filament onto spool holder with fed from needed, gently usethe theback object tool3D20.
SMW 8 7.8.14 3D20 Customer Support 1-844-4DRML3D (1-844-437-6533) www.dremel3d.com Dremel 3D20 Software Installed from www.dremel3d.com or from SD card provided with the Dremel 3D20 Dremel 3D Community This is for the Dremel Makers. JOIN THE COMMUNITY The ones who endlessly imagine new ideas. New projects. New missions. Always wondering, What can I build? How can I make it better? More useful? More interesting? More mine. 1. Installing Dremel software from Dremel3D.
