Datasheet

31
542
402
456*
560
561
562
569
570
545
30
1 1/4"
31,8 mm
.0625"
CUTTING/SHAPING WHEEL
Model 542 (CARBIDE)
For cutting and shaping on soft
and hard woods, fiberglass,
plastics and laminates.
Do not use on metal.
Mandrel included.
Thickness .070" (1,8 mm)
CUT-OFF WHEELS
For slicing and cutting metal, wood and plastic.
Cut-Off Wheels make it easy to cut or slot bolts,
screws, sheet metal, thin wood and plastic. The
cut-off wheel cuts only along its edge. Do not
attempt to sand or cut curved holes with them.
Use 409,
420, 426, 456 and
540 with Mandrel 402
409
36 per pack
FIBERGLASS REINFORCED CUT-OFF WHEELS
15/16"
23,8 mm
.025"
420
20 per pack
15/16"
23,8 mm
.040"
540
5 per pack
1 1/4"
31,8 mm
.045"
1 1/2"
38,1 mm
.045"
456 package includes
10 Cut-Off Wheels and
a washer set. Washer
set only used with 456.
Mandrel #402 is sold
separately.
426B
Cut-Off Wheel Dispenser
20 per pack
426
5 per pack
426A
12 per pack
Accessories
DIAMOND WHEEL – Model 545
Great for cutting, sawing and
carving of hard materials such as
marble, concrete, brick,
porcelain, ceramics, hard
epoxy, soft and hard wood.
Mandrel #402 is included.
Thickness .023" (0,6 mm)
Cutting
Drywall
Cutting Bit – Model 560*
Gives you fast clean cuts
in drywall.
Multipurpose
Cutting Bit – Model 561*
Cuts hardwood up to 3/8"
and softwood up to 5/8".
Also cuts plastic, fiberglass,
drywall, laminate, aluminum
& vinyl siding.
Tile Cutting Bit –
Model 562*
Cuts ceramic wall tile,
cement board, and plaster.
(Not for use on floor tile.)
Carbide Grout Removal
Bits – Model 569 and
Model 570
†
Ideal for replacing wall and
floor grout or removing grout
to replace broken tiles.
DRYWALL, MULTIPURPOSE, TILE AND
GROUT ACCESSORIES
Do not run
in excess of
20,000 RPM.
* Use with cutting guide (page 21)
†
Use with grout removal guide (page 20)
Accessories
RIP/CROSSCUT BLADE –
Model 546
For use with Mini Saw
Attachment #670 only (page 22).
Thickness .023" (0,6 mm)
1/8"
3,2 mm
1/16"
1,6 mm