Use and Care Manual
-12-
Multi-Max™ Accessory Speed Settings
Use only Dremel, high-performance accessories.
60, 120 and 240 Grit
Paper - Bare Wood
60, 120 and 240 Grit
Paper - Paint
HCS Wood Flush
Cut Blade
1-1/4" x 3/8"
HCS Wood Flush
Cut Blade
1-1/4" x 3/4"
HCS Wood Flush
Cut Blade
1-1/4" x 1-1/8"
HCS Wood Flush
Cut Blade
1-5/8" x 3/4"
HCS Wood Flush
Cut Blade
1-1/4" x 1-11/16"
BiM Wood/Metal
Flush Cut Blade
1" x 3/4"
BiM Wood/Metal
Blade
1-1/4" x 1-1/8"
2 - 10
2 - 10
8 - 10
8 - 10
8 - 10
8 - 10
8 - 10
8 - 10
8 - 10
2 - 10
2 - 10
6 - 10
6 - 10
6 - 10
6 - 10
6 - 10
6 - 10
6 - 10
-
2 - 10
-
-
-
-
-
-
-
2 - 6
2 - 6
2 - 6
2 - 6
2 - 6
2 - 6
2 - 6
2 - 6
2 - 6
8 - 10
8 - 10
-
-
-
-
-
8 - 10*
8 - 10*
8 - 10
8 - 10
-
-
-
-
-
8 - 10
8 - 10
"
-
-
-
-
-
-
-
-
-
!
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
MM70W
MM70P
MM411
MM440
MM460
MM470
MM480
MM422
MM462
WOOD
1/4
IN
3/4
1
1/2
"
Note: The MM720 Multi-Flex Blade is not compatible with the MM45.
-11-
FIG. 8FIG. 7
CORRECT: Sand with a smooth
back and forth motion, allowing the
weight of the tool to do the work.
INCORRECT: Avoid sanding with
only the tip of the pad. Keep as
much sand paper in touch with the
work surface as possible.
CORRECT: Always sand with the
pad and sandpaper flat against the
work surface. Work smoothly in a
back and forth motion.
INCORRECT: Avoid tipping the
pad. Always sand flat.
CORRECT: Always cut with a
smooth back and forth motion.
Never force the blade. Apply light
pressure to guide the tool.
INCORRECT: Do not twist the tool
while cutting.This can cause the
blade to bind.
CORRECT: Make sure flexible
scraper blade flexes enough
INCORRECT: Avoid screw head
touching surface with flexible
scraper blade.
Please refer to figures 7 and 8 for further instruction on how to use your Dremel Multi-Max™.
Following these instructions will allow you to get the highest performance out of your oscilating tool.
DM 2610030830 01-13_DM 2610030830 01-13.qxp 1/22/13 11:25 AM Page 11