User Manual

datasheet
Version 0.9
2017-09-13
deRFsamR21E-23S00/-23S20 datasheet
www.dresden-elektronik.de
Page 29 of 36
11.2. European Union (ETSI)
Hereby, dresden elektronik ingenieurtechnik gmbh declares that the radio equipment types
deRFsamR21E-23S00 and deRFsamR21E-23S20 are in compliance with the Directive
2014/53/EU. The full text of the EU declaration of conformity is available at the following
internet address:
https://www.dresden-elektronik.de/funktechnik/solutions/wireless-light-control/eu-
conformity/?L=1.
If the deRFsamR21E-23S00 and deRFsamR21E-23S20 modules are incorporated into a
product, the manufacturer must ensure compliance of the final product to the European
harmonized EMC and low-voltage/safety standards. A Declaration of Conformity must be
issued for each of these standards and kept on file as described in Annex VI of the Radio
Equipment Directive 2014/53/EU.
The manufacturer must maintain a copy of the deRFsamR21E-23S00 and deRFsamR21E-
23S20 modules documentation and ensure the final product does not exceed the specified
power ratings, antenna specifications, and/or installation requirements as specified in the
user manual. If any of these specifications are exceeded in the final product, a submission
must be made to a notified body for compliance testing to all required standards.
The CE marking must be affixed to a visible location on the OEM product. The CE mark shall
consist of the initials "CE" taking the following form:
 If the CE marking is reduced or enlarged, the proportions must be respected.
 The CE marking must have a height of at least 5 mm except where this is not
possible on account of the nature of the apparatus.
 The CE marking must be affixed visibly, legibly, and indelibly.
More detailed information about CE marking requirements can be found in [3].