Instruction manual

• AEM

• Autronic

• DTAFast

• EFI Technologies

• Emerald

• Fast XFI

• Haltech

• Hydra Nemesis

• Innovate MTS Chain Devices

• J1939

• Phidgets

• Wolf EMS

These licenses can be purchased from Drew Technologies at any time. Licenses do not need to be purchased when you buy your

DashDAQ. If a license is purchased later, you will need to update DashDAQ through the DashDAQ Recovery Tool (section 0).

Drew Technologies keeps an online database of what licensed DashDAQ drivers a DashDAQ owner has purchased. When the update

tool is used, a serial number query will be sent to the server and available licensed DashDAQ drivers will be listed. Select from the

available drivers list and continue with the DashDAQ Recovery Tool wizard. When the wizard finishes the licenses will automatically be

installed in DashDAQ. Please refer to section 0 for complete details on updating DashDAQ.

USING DEVICE MANAGER

The DashDAQ Device Manager is where all DashDAQ inputs are specified. Anything specified in the Device Manager will be available to

any gauge on the DashDAQ.

To access the Device Manager tap on [Setup] from the Main Menu, then [Devices], then [Manager].

Figure 32: Device manager screen

Figure 33: Selecting the next available slot

Notice that there are slots labeled from A-H. These are spots where the drivers are specified. To add a driver/input tap on a empty slot.

Slot [b] will be used for this demonstration.

Tap on [Add Device].

Next Tap on the driver you would like to install. Tap on [Install].

Next select which port to be used, then tap [Ok].

Now your device will be installed in the slot you specified. All installed devices can be assigned to any gauge.