Instruction manual

39
ADDING SUPPORT FOR ENHANCED OBD2 DATA
If you purchased your DashDAQ with an OEM Enhanced driver, the license and driver will already be installed on your DashDAQ. If a
new enhanced driver was purchased or if you need to change drivers for any reason, the process is handled through the DashDAQ
Recovery Tool. When a software add-on is purchased at DashDAQ.com, we update our web server with the licenses for the software
add-ons you have purchased. After this happens, your licensed drivers are always available through the DashDAQ Recovery Tool. The
Recovery Tool queries the internet every time you update your DashDAQ and gets a list of licensed software add-ons available for you
unit based on serial number. This tool requires a connection to the internet every time you update your DashDAQ.
If a user buys a Chrysler Enhanced driver for example:
1. The user purchases the add-on at DashDAQ.com.
2. Next the user waits for confirmation of driver purchase from Drew Tech.
3. Next the user runs the update tool and selects the appropriate drivers. See Section 0
4. Lastly the driver is specified in the DashDAQ Device Manager. See Section 0
Select a blank Device Manager slot and Tap on [Add Device].
Figure 34: Tap [Driver] to choose and install a new driver
Figure 35: Select the driver for Chrysler enhanced obd2 data
Tap on an item to select it from the list. Chrysler Specific will be used for this demonstration. Tap [Install].
Tap j1962 and then Tap [Ok].