IMclean Manual Note: Before you start, please fill out the enclosed disclosure form send to Drew Technologies
LIMITED WARRANTY Drew Technologies, Inc. guarantees that every IMClean device as well as included accessories are free from physical defects in material and workmanship under normal use for one year from the date of purchase. If the product proves defective during this warranty period, email Drew Technologies Customer Support (support@drewtech.com) in order to obtain a Return Authorization number.
Introduction Thank you for choosing IMClean! This Quick Start Guide covers the initial setup of your device. Your IMclean Kit includes: IMClean Driver CD Vehicle Cable USB cable Self Test Cable Cigarette Lighter Adaptor Cable. External power cable w/Battery clamps Bluetooth dongle(only with Bluetooth units) • • • • • • • • The vehicle cable is custom made by Drew Technologies, Inc. To obtain replacement/additional vehicle cables, please contact Drew Technologies, Inc.
IMclean Cables The cables provided with the IMclean are proprietary. Attempting to use the IMclean with cables not produced by Drew Technologies will cause the IMclean to not communicate with vehicles or the PC. Using a NON-DrewTech vehicle cable will cause the Cable light to be red on the IMclean. Cable extensions for either the USB or Vehicle cable is not approved and is a modification to the certified hardware package. OBD extenders can cause CAN communication failures.
Installing DAD Drivers Insert the provided driver CD and run the setup application prompted by the Autorun feature. Follow the steps on-screen to install the IMclean DAD drivers and vendor applications. Once installed, all IMclean firmware and USB driver updates will be performed from the IMClean Support and Updater application located in Start All Programs Drew Technologies, Inc Connecting your DAD - Wired Note: Even wireless DAD devices will work in wired mode.
Connecting your DAD Wireless If you have purchased a wireless DAD, you can now configure it for wireless use. If you did not purchase a wireless DAD, skip this section. 1. Unpack the TrendNET Bluetooth dongle that you received 2. Plug the Bluetooth dongle into a USB port on your PC and allow Windows to install the generic drivers. DO NOT use the manufacturer's drivers. 3. Power your DAD device up. Plug into a vehicle and wait 30 seconds. If you power it up thru USB, Bluetooth will be disabled. 4.
6. Select your device from the available options, then click next 7. Enter "2534" in the text box and click next pair the IMClean BT.
. Your IMClean BT has been successfully paired with your PC. Install the BAR OIS Software 1. Go to the registration page provided by BAR. 2. Register your Station. 3. Download and run the installer. 4. Start the BAR OIS application; Follow onscreen instructions regarding setting up your DAD unit.
Support & Updater Application • For Windows 8 skip to next step. Otherwise go to Start All Programs Drew Technologies, Inc BAR OIS IMClean Support and Updater.
• For Windows 8, click on the IMclean Support and Updater application from the Start page. Open the application and click next.
• If you device is up to date, you will see this screen. If your device requires an update, you can click the update button in the current version box or click next. • Additional options for your IMClean are available on this page.
Using Wireless 1. You must only have One (1) IMclean BT paired with your PC at any time. The IMclean driver will inform you if you have multiple devices paired to your PC and will stop functioning. 2. The IMclean DAD wireless connection has a range of up to 100 feet. Actual wireless range depends on the environment the DAD is operated in. As the DAD is moved away from the PC with the Bluetooth connection, performance will decrease and eventually the connection will fail. 3.
Performing a Self Test 1. 2. 3. 4. 5. 6. Connect the IMClean to the PC, and you must power the unit via the cigarette lighter adaptor or cable with battery clamps. Plug in the Self Test cable to the female DB9 port by the external power connection. Log into the BAR OIS application. Open the DAD Diagnostic section. Click Ready when the IMclean is ready to test. If either function returns a failure, contact Technical Support.
Firmware & DLL Update Once a Firmware or DLL update has been released, you will have two weeks to update your device. If you exceed the two week window, your device will no longer communicate with the BAR OIS application until you update the firmware in your device. You cannot downgrade your software. To check and upgrade firmware, go to Start All Programs Drew Technologies, Inc BAR OIS IMClean Support and Updater. If you device is up to date, you will see this screen.
Uninstalling your DAD Drew If you wish to remove the IMclean device from your computer permanently, you can remove all software by using the uninstall feature from Windows control panel. Technical Support & Repairs Drew Tech is available Monday through Friday to answer any technical support questions. Please email support@drewtech.com if you need assistance or call (734) 222-5228 x3.
Other Drew Tech Products Drew Technologies has several products available for data acquisition, diagnostics, development, testing, and reprogramming for modern vehicles. Visit www.drewtech.com for more information CarDAQ-Plus™ - Fully SAE J2534 compliant. Ethernet and USB connectivity to a computer, a built-in operating system for running internal programs, protocol support for all modern vehicles, and six analog inputs.
