DRI BEAST SIM SERIES LGR DEHUMIDIFIER OWNER’S MANUAL st ea ri D B
Operation and Service Instruction SIM-75, SIM-95, SIM-110 English Owner's Manual Dri Beast LGR Dehumidifier SIM Series 115-volt model READ AND UNDERSTAND THESE INSTRUCTIONS Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.
English INTRODUCTION The Dri Beast LGR dehumidifier series is designed with the end user in mind and provides outstanding performance. Our LGR technology helps remove moisture, eliminate mildew, musty odors, sweating on walls and windows, in the most demanding of environments. We offer three different size beasts which help you to solve your most demanding problems in any size room or building. What's in the box 1.Dri Beast LGR SIM Dehumidifier 2.20-foot drainage hose 3.10-foot power cord 4.
Specification SIM-75 SIM-95 SIM-110 Model Temperature Range 41℉~90℉ 5℃~ 3 2℃ 41℉~90℉ 5℃~ 3 2℃ 41℉~90℉ 5℃~ 3 2℃ Rate Amps 8.3A Rated Power 760W 75Pt(36L)(80℉/26.7℃/60%RH) 130Pt(62L)(86℉/30℃/80%RH) 115V/60Hz 910W 180Pt(85L)(86℉/30℃/100%RH) 1100W 95Pt(45L)(80℉/26.7℃/60%RH) 860W 160Pt(76L)(86℉/30℃/80%RH) 115V/60Hz 1030W 228Pt(108L)(86℉/30℃/100%RH) 1220W 110Pt(52L)(80℉/26.7℃/60%RH) 1140W 187Pt(88L)(86℉/30℃/80%RH) 115V/60Hz Display Range 30-90%RH Weight Dimensions (WxDxH) 24.0"x23.
English SET UP YOUR LGR DEHUMIDIFIER 1. Your dehumidifier is designed for easy use and maintenance. Make sure that the filter is properly installed before use. 2. Keep the unit's air inlet and outlet grids at least 4 inches away from any wall. 3. Select a flat, stable surface to place the unit. Do not place on or near heat sources such as stoves, radiators, or heaters, or in direct sunlight. 4. Do not use the unit in places where chemicals are stored.
OPERATING YOUR DEHUMIDIFIER English IMPORTANT: Always unplug the unit before moving or servicing. Use only the ON/OFF button to turn the unit on and off. 1. Plug the power cord into a power outlet. Di appears on the HUMIDITY% display. 2. Press the ON/OFF button to turn the unit on. The previous humidity setting appears on the display, then the current humidity appears. 3. Press the HUMIDITY UP or DOWN button to choose the desired humidity.
English Storage/ After Each Use Wipe the enclosure, control panel, and cord with a damp cloth or sponge. The outlet grid should simply be dusted. It should not be immersed in water. Use pump Drain button to empty water. Walk out the hose to drain it completely. Remove the inlet filter and using gas to blow off the dust on the surface. Do not rinse or wash the filter. Make sure the filter is completely dry before reinstalling. Take out the filter 1.
Replacement Parts - call your Supplier English Please provide following information: -Model number -Serial number -Part description and number as shown in parts list Repair Parts List Reference # Description Part Number Quantity 11 Filter SGD-LGR-A011 1 36 Humidity sensor SGD-LGR-A036 1 26 Pump SGD-LGR-A026 1 28 Wheel SGD-LGR-A028 1 Dri Beast - LGR dehumidifier -7-
English OPTIONAL PARTS - Air outlet duct ring M5 nuts (pre-installed) Duct ring M5X12screws TROUBLESHOOTING Symptom The dehumidifier will not turn on Reduced air flow or poor dehumidifying efficiency Possible Causse(s) Corrective Action 1. Bad fuse Replace the fuse 2. No Power Check power supply to the unit 1. Inlet grid or outlet grid may be blocked Check that nothing is in front of or in back of the dehumidifier 2. The filter may be clogged Clean the filter or replace it, if necessary 3.
English NOTES Dri Beast - LGR dehumidifier -9-
NOTES English -10- Dri Beast - LGR dehumidifier