Instructions / Assembly

To minimize potential damage to the foam

subfloor panels, it is recommended to install

1 row lengthwise at a time, then install the

finished hard surface flooring as you go.

There are two reasons for this. First, the

weight of the finished floor will help hold

the first row of DRICORE Insul-Armor

together when installing the next row.

Second, it is easier to reach across 2' and

not have to walk on the unprotected

DRICORE Insul-Armor panels which will help

reduce the risk of damage.

This applies for all hard surface finished

floors (LVT, LVP, laminate and engineered

wood).

is a registered trademark of AGT Products (IP) Inc. used under license by AGT Products Inc. and AGT

Products (USA) Inc. 1-866-767-6374