TDS
Mix Ratio 1:1 by volume
Viscosity 2,000 cps @77 ˚F (25 ˚C)
Gel Time (60 g mass) 25 minutes
Tack Free Time (73
F or 23 C) 3 to 5 hours
Tensile Properties (ASTM D638), 7 day cure
Tensile Strength: 2,800 psi (19.3 MPa)
Tensile Elongation: 40%
DRICORE™ PRO Concrete Repair Saturant-Adhesive Epoxy Technical Data
Storage Conditions: 40 ˚F – 95 ˚F (5
˚C – 35 ˚C).
Condition material to: 65 ˚F – 85˚F (18˚C – 29 ˚C) before using.
Flexural Strength (ASTM D790) 3,000 psi (20.9 MPa)
Shrinkage on Cure (ASTM D2566) 0.2%
24 month shelf life when stored in unopened containers in dry conditions and stored at 40°F-95°F (4°C-35°C)
*NOTE: Epoxy cure is affected by temperature. Low
temperatures will increase cure time, higher temperatures
with decrease cure time.
Bond Strength (ASTM C882) 2 day cure: 2,000 psi (13.8 MPa)
14 day cure: 2,800 psi (19.3 MPa)
Compressive Properties (ASTM D695), 7 day cure
Compressive Strength: 5,000 psi (34.5 MPa)
Compressive Modulus: 110,000 psi (760 MPa)
Thermal Compatibility (ASTM C884) Pass
Heat Deflection Temperature (ASTM D648) 120˚F (49 ˚C)
Water Absorption (ASTM D570) 0.2% (24 hr)
Chloride Ion Permeability (AASHTO T277) 0.0 coulomb
6. MINIMUM CURING TIME
5. TECHNICAL DATA
1.DESCRIPTION
•High strength/low modulus structural adhesive •Rapid cure formula
•Made in America •Convenient 1:1 mix ratio by volume
•Provides a vapor barrier after curing
2. WHERE TO USE
3. ADVANTAGES
4. SHELF LIFE / STORAGE
Compressive Strength (ASTM C579)
3 hour cure: 1.500 psi (10.3 MPa)
24 hour cure: 5,000 psi (34.5 MPa)
Bond Strength (ASTM C1583/ACI 503R) 300 psi (2.0 MPa)
TEMPURATURE
50 ºF (10 ºC) 60 ºF (16 ºC) 70 ºF (21 ºC) 80 ºF (26 ºC) 90 ºF (32 ºC)
MINIMUM CURE TIME
10 HRS / H 6 HRS / H 4 HRS / H 3 HRS / H 2 HRS / H
DRICORE™ PRO Concrete Repair Saturant-Adhesive Epoxy | Revision Date 09/25/2020
01
TECHNICAL DATA SHEET
2311 Royal Windsor Drive Unit 2
Mississauga, Ontario, Canada L5J 1K5
P: +1 866 767 6374
E: info@dricore.com
© AGT Products (IP) Inc. All rights reserved. DRICORE™ is a trademark of AGT Products (IP) Inc. Used under license by AGT Products Inc. and AGT Products (USA) Inc.
1-866-767-6374 | www.Dricore.com
DRICORE™ PRO Concrete Repair Saturant-Adhesive Epoxy is a two-component, 100% solids, moisture-tolerant, low to medium viscosi-
ty, high strength, low modulus, multi-purpose liquid epoxy adhesive. It meets the current ASTM C881 and AASHTO M235 Types I, II, IV,&
V Grade 3, Classes B & C specifications.
DRICORE™ PRO Concrete Repair Saturant-Adhesive Epoxy can be used for wet lay-up structural repairs with carbon fiber reinforced
polymer (CFRP), fiberglass reinforced polymer (GFRP) and injections. Use to bond freshly mixed concrete to hardened concrete, to fill
voids and cracks in concrete, masonry and other substrates. It can also be injected, used as a binder in epoxy mortar, as an anchoring
adhesive, or as a binder for high friction surface treatments (HFST) on concrete, asphalt or other substrates.