Quick Guide

5 6
Wearing Steps
1. Adjust head strip to the most comfortable size for yourself.
2. Wear the head strip on your head and make sure the Velcro
side facing forward.
3. Put your X3 camera on the head strip and make sure camera
attached to the Velcro solidly, the surface of button and micro
SD card slot should face to the ground
Initial Setup
Open the Memory Card/USB Cover.
1. Insert a Class 6 or higher microSD/HC/XC card (up to 128GB).
Format before first usage.
2. Connect the camera via a micro USB cable to a powered USB port,
charge the battery for 3 hours before first use.
3. Close the Memory card/USB cover and now you are ready to go!
2 3
1
4