Quick Guide

7 8
Getting Started
Reset Your Camera
POWER ON/OFF
1. Press and hold the button to power on your X3.
2. Status LED is Green in color, indicating video mode.
3. The camera is now ready to record video or take photos.
4. To power off, press and hold the button for 3 seconds
If your camera becomes unresponsive, press and hold the button
for 20s to reset it.
MODE NAVIGATION
To change the current camera recording mode, press the
button to toggle between Video and Photo mode
VIDEO MODE
(Green LED) Press the button to start recording. The Status
Turn On/Off Wi-Fi
LED will flash red to indicate recording. Press the button again to
stop recording.
PHOTO MODE
(Yellow LED) The camera will capture still image when the
button is pressed, and the status LED will flash red once when a photo
is captured.
Press the button once to turn on Wi-Fi on your X3, press the [Wi-Fi]
button again to turn Wi-Fi off.
Wi Fi password is "1234567890" by default, you can modify it through
Drift Life App once connected.
Tip: In case you forgot the new password, press and hold the button and
then press the button to start the camera, Wi-Fi password will be reset to
default.