SDS

Safety Data Sheet
Version 1
.
1
3
SDS Number 300
000000021
Revision Date 01/18/2021 Print Date 01/18/2021
trained personnel should begin cardiopulmonary resuscitation immediately. In
case of shortness of breath, give oxygen.
Most important : Exposure to oxygen deficient atmosphere may cause the following symptoms:
symptoms/effects - acute and Dizziness. Salivation. Nausea. Vomiting. Loss of
delayed mobility/consciousness.Shivering fit. Sweating. Blurred vision. Headache.
Increased pulse rate. Shortness of breath. Rapid respiration.
Immediate Medical Attention and Special Treatment
Treatment : If exposed or concerned: Get medical attention/advice.
5. FIRE
-
FIGHTING MEASURES
Suitable extinguishing media : All known extinguishing media can be used.
Specific hazards : Spill will rapidly vaporize forming an oxygen deficient vapor cloud. Vapor cloud
may obscure visibility. Do not direct water spray at container vent. Move away
from container and cool with water from a protected position. Keep containers
and surroundings cool with water spray.
Special protective equipment : Wear self contained breathing apparatus for fire fighting if necessary.
for fire-fighters
6. ACCIDENTAL
RELEASE MEASURES
Personal Precautions, : Monitor carbon dioxide level. Evacuate personnel to safe areas. Ventilate the
Protective Equipment, and area. Monitor oxygen level. Wear self-contained breathing apparatus when
Emergency Procedures entering area unless atmosphere is proved to be safe.
Environmental precautions : Prevent further leakage or spillage. Prevent from entering sewers, basements
and workpits, or any place where its accumulation can be dangerous. Do not
discharge into any place where its accumulation could be dangerous.
Methods for cleaning up : Ventilate the area.
Additional advice : If possible, stop flow of product. Increase ventilation to the release area and
monitor oxygen level. Vapor cloud may obscure visibility. Do not spray water
directly at leak. If leak is from cylinder or cylinder valve, call the emergency
telephone number. If the leak is in the user's system, close the cylinder valve
and safely vent the pressure before attempting repairs.
7. HANDLING AND STORAGE
Handling
Know and understand the properties and hazards of the product before use. Only experienced and properly
instructed persons should handle compressed gases/cryogenic liquids. Before using the product, determine its
identity by reading the label. Do not remove or deface labels provided by the supplier for the identification of the
cylinder contents. Before connecting the container, check the complete gas system for suitability, particularly for
pressure rating and materials. Before connecting the container for use, ensure that back feed from the system
3/10
iDrink Products Inc
Carbon dioxide (Refrigerated)