SDS

Safety Data Sheet
Version 1
.
1
3
SDS Number 300000000021
Revision Date 01/18/2021 Print Date 01/18/2021
into the container is prevented. Close container valve after each use and when empty, even if still connected to
equipment. Never attempt to repair or modify container valves or safety relief devices. Damaged valves should
be reported immediately to the supplier. If user experiences any difficulty operating cylinder valve discontinue
use and contact supplier. Do not remove or interchange connections. Ensure the complete gas system has
been checked for leaks before use. Prevent entrapment of cryogenic liquid in closed systems not protected
with relief device. A small quantity of liquid produces large volumes of vaporized gas at atmospheric pressure.
Containers used in shipment, storage, and transfer of cryogenic liquid are specially designed, well-insulated
containers equipped with a pressure relief device and valves to control pressure. Under normal conditions,
these containers will periodically vent product to limit pressure buildup. Ensure that the container is in a well–
ventilated area to avoid creating an oxygen–deficient atmosphere. Use adequate pressure relief in systems
and piping to prevent pressure buildup; liquid in a closed container can generate extremely high pressures
when vaporized by warming. Employ suitable pressure regulating devices on all containers when the gas is
being emitted to systems with lower pressure rating than that of the container. Only transfer lines designed for
cryogenic liquids shall be used. Do not subject containers to abnormal mechanical shock. When moving
cylinders, even for short distances, use a cart (trolley, hand truck, etc.) designed to transport cylinders. When
doubt exists as to the correct handling procedure for a particular gas, contact the supplier.
Storage
Open/close valve slowly. Close when not in use. Wear Safety Eye Protection. Check Safety Data Sheet before
use. Use a back flow preventative device in the piping. Do not change or force fit connections. Close valve after
each use and when empty. Always keep container in upright position. Read and follow the Safety Data Sheet
(SDS) before use. Do not allow storage temperature to exceed 50°C (122°F). Containers should be stored in a
purpose build compound which should be well ventilated, preferably in the open air. Full containers should be
stored so that oldest stock is used first. Do not store in a confined space. Full and empty cylinders should be
segregated. Store containers in location free from fire risk and away from sources of heat and ignition. Return
empty containers in a timely manner. Stored containers should be periodically checked for general condition
and leakage. Protect containers stored in the open against rusting and extremes of weather. Containers should
not be stored in conditions likely to encourage corrosion. Cryogenic containers are equipped with pressure relief
devices to control internal pressure. Under normal conditions these containers will periodically vent product. All
vents should be piped to the exterior of the building. Observe all regulations and local requirements regarding
storage of containers.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering measures
Provide natural or mechanical ventilation to prevent accumulation above exposure limits.
Natural or mechanical to prevent oxygen deficient atmospheres below 19.5% oxygen.
Keep self contained breathing apparatus readily available for emergency use.
Personal protective equipment
Respiratory protection : Self contained breathing apparatus (SCBA) or positive pressure airline with
mask are to be used in oxygen-deficient atmosphere. Air purifying respirators will not
provide protection. Users of breathing apparatus must be trained.
Hand protection : Wear working gloves when handling gas containers. If the operation involves possible
exposure to a cryogenic liquid, wear loose fitting thermal insulated or cryo-gloves.
4/10
iDrink Products Inc
Carbon dioxide (Refrigerated)